STEEL GRADE OF VARIOUS COUNTRIES | GB | AISI | DIN | JIS | |
W6mo5cr4v2 | M2 | 1.3343 | SKH51 |
CHEMICAL COMPOSITION | C | Si | Mn | Cr | Mo | W | V |
BZ M2 | 0.85 | 0.3 | 0.3 | 4.0 | 5.0 | 6.0 | 2.0 |
CONVENTIONAL SMELTING
EF+LF+VD+ESR
DELIVERY STATUS
Annealing, hardness Hb≤255
DELIVERY SIZE
Thickness 5~300mm, width 210~810mm, length 2000~3000mm
Round bar φ5~φ300mm,length 2000~3000mm
The Main Purpose
1. For powder pressing die mold,shearing machine mold,add fiberglass to plastic mold etc.
2. Suitable forvibration and shock load to withstand the mold:deep drawing mold,punching die mold.
3. Metal cutting saws,cold heading and extrusion tools ect.
The Main Characteristic
1. Cold forging die mold,stamping die mold,with the advantages of small carbide non-uniformity and high toughness.
2. Easy to overheat, should strictly control the quenching temperature; The protection of heat treatment is more stringent.
3. Due to good hardness and wear resistance, it used for cutting tools that cut harder cutting materials.
4. High-speed steel M2 has a greater tendency to carbide, So the protection of heat treatment requirements more stringent, suitable for vibration and shock
STEEL GRADE OF VARIOUS COUNTRIES | GB | AISI | DIN | JIS | |
W6mo5cr4v2 | M2 | 1.3343 | SKH51 |
CHEMICAL COMPOSITION | C | Si | Mn | Cr | Mo | W | V |
BZ M2 | 0.85 | 0.3 | 0.3 | 4.0 | 5.0 | 6.0 | 2.0 |
CONVENTIONAL SMELTING
EF+LF+VD+ESR
DELIVERY STATUS
Annealing, hardness Hb≤255
DELIVERY SIZE
Thickness 5~300mm, width 210~810mm, length 2000~3000mm
Round bar φ5~φ300mm,length 2000~3000mm
The Main Purpose
1. For powder pressing die mold,shearing machine mold,add fiberglass to plastic mold etc.
2. Suitable forvibration and shock load to withstand the mold:deep drawing mold,punching die mold.
3. Metal cutting saws,cold heading and extrusion tools ect.
The Main Characteristic
1. Cold forging die mold,stamping die mold,with the advantages of small carbide non-uniformity and high toughness.
2. Easy to overheat, should strictly control the quenching temperature; The protection of heat treatment is more stringent.
3. Due to good hardness and wear resistance, it used for cutting tools that cut harder cutting materials.
4. High-speed steel M2 has a greater tendency to carbide, So the protection of heat treatment requirements more stringent, suitable for vibration and shock
粤ICP备2022045314号 © 2022 Guangdong Beizhong Technology Development Co., Ltd. All Rights Reserved. Support by Leadong.Sitemap